Review Nov 13, 2026 · 5 min read

Gweike B25 vs Langmuir Titan 25T: Same Idea, Built Properly?

Two 25-ton, 33-inch, single-phase CNC press brakes for the home shop. How the new Gweike B25 compares to the Langmuir Titan 25T on controller, safety, price and build.

GWEIKE B25 25-ton CNC press brake

Gweike just announced the B25: a 25-ton CNC press brake, 33 inches wide, single-phase power, small enough for a garage. If you know the Langmuir Titan 25T, that spec line sounds very familiar.

It should. It is the same recipe. The interesting part is where Gweike decided to do things differently.

Credit where it is due: Langmuir made this category

A CNC press brake used to be out of reach for a home shop, and the hydraulics were a big reason. Traditional power units and proportional valves are expensive.

Langmuir found a cheaper way: one servo motor driving a small gear pump per cylinder, with a glass scale on each side measuring where the ram actually is. No big power pack. That put a real CNC brake at around $4,000, and that changed the space.

It is a middle ground. Not the fastest, not the most tonnage, but affordable.

I was close to buying a Titan myself. What stopped me was reading what owners were running into.

What Titan owners are saying

To be fair, it is mixed. There are owners on Langmuir’s own forum who use their Titan daily, get accurate repeatable bends, and say support always sorted them out. That counts.

But the same problems come up again and again:

  • The control computer. The Titan runs on a hobby single-board computer booting from an SD card. Owners report corrupted cards, sluggish response and settings that do not stick. One owner got frustrated enough to reverse engineer the software and swap the storage.
  • Oil leaks. Leaking tanks are a long-running topic, including oil ending up in the electronics cabinet. Langmuir says it changed the tank sealing in production from March 2025.
  • Limit switches and backgauge. Owners describe homing errors and a backgauge that will not stay square, and some replace the switches with industrial ones at their own cost.
  • Quality control. Missing or wrong parts, holes that were never tapped, a backgauge tube machined off-axis. Usually replaced for free, but you are the one finding it.
  • Software workflow. Long-standing requests around pedal behavior, error handling and re-homing.

None of that makes the concept wrong. The frame and the hydraulic idea are sound. The trouble sits in the parts Langmuir built from scratch.

Gweike B25 vs Langmuir Titan 25T: side by side

Gweike B25Langmuir Titan 25T
Bending force25 metric tons (245 kN)25 tons
Bend length835 mm / 33 in33 in
1/4 in mild steelListed as max thicknessUp to about 20 in long
Drive2 cylinders, servo pumps2 cylinders, servo gear pumps
Ram feedbackGlass linear scales, Y1/Y2 closed loopGlass linear scales on each ram
ControllerCommercial Syntec press brake controlLangmuir’s own BendControl
SafetyLight curtain, guarded pedal, e-stopTwo-hand palm switches, pedal, audio chime
BackgaugeOptional servo X/R, 150 in/minOptional X/R, $1,249, 100 in/min
Power220/240 V single phase, 2.6 kW240 V single phase (120 V with transformer)
WeightAbout 600 kgAbout 500 kg crated
Warranty1 year12 months hardware, 6 months electronics
Price$4,899 super early bird, $7,899 list$3,995
AvailabilityKickstarter, not launched yetShipping now, North America

Mechanically these are close relatives. The differences are in the controller and the safety, and that is no accident.

Make or buy: the decision that matters

Every machine builder has to decide what to do in-house and what to buy from a specialist. Get that wrong and you spend years fixing things that somebody else solved long ago.

Langmuir did nearly everything themselves, including the control hardware and the bending software. That keeps the price down, and it is exactly where the owner complaints pile up.

Gweike made a different call. Steel, cylinders, assembly: that is their own work, and they already build industrial press brakes up to hundreds of tons. For the control they went to Syntec, a company that makes commercial press brake controllers, and worked with them on a version skinned for this machine.

Touchscreen CNC controller on the Gweike B25 press brake
The B25 touchscreen control. Image: Gweike

So the bend sequencing, springback compensation and material library come from a platform that already runs production machines. You are not the beta tester for somebody’s first bending software.

It is the same approach I saw on the M3 Ultra: Gweike does not invent a new category, it takes an existing one and builds it more industrially. I wrote about that in my M3 Ultra vs xTool MetalFab comparison.

Light curtain instead of palm buttons

The Titan keeps your hands safe by making you hold two palm buttons while the punch comes down. It works, but owners call the button arms annoying, and some 3D print shorter ones.

The B25 ships with a light curtain as standard. That is how industrial brakes do it, and on a machine that will often be somebody’s first press brake, it is a real upgrade.

Safety features of the Gweike B25, including the light curtain
Light curtain, guarded pedal, e-stop and overload protection. Image: Gweike

Two sides in sync

Keeping both ends of the ram level is one of the hard problems in a press brake. My own 30-ton brake is a torsion-bar machine: a mechanical bar ties left and right together, and you live with the workarounds.

A scale and a servo per side is the proper way, and both of these machines do it. Gweike claims 0.025 mm side to side under an off-center load.

The honest caveats on the B25

  • It costs more. $4,899 at super early bird, $7,899 list, against $3,995 for the Titan.
  • It is a Kickstarter that has not opened. No ship date yet.
  • Nobody has reviewed one. Every B25 number here is a manufacturer claim.
  • It is not fast either. 10 mm/s bending speed. That comes with the servo pump approach.
  • The backgauge is optional on both. Price the bundle, not the base machine.

Which one should you buy?

Titan 25T if price decides, you are in North America, you want a machine now, and you do not mind tinkering with it.

Gweike B25 if you can wait, you want a commercial controller and a light curtain, and you would rather pay more than debug. On paper it is the machine I wanted the Titan to be.

I plan to get a B25 into my workshop and put it next to my big brake. Then we will see if the paper holds up.

Sign up for the Gweike B25 super early bird price ($4,899 instead of $7,899)

Running a Titan?

Come tell me how it is holding up. I would like to hear the good and the bad. Join the Discord.

Related

metal bending metalworking press brake sheet metal

Have questions about this build?

Join the Discord and let's talk shop.

forum Join the Discord

Related Posts

Is This A Scam? $1000 AliExpress ATC CNC Spindle Review Mightymill

Is This A Scam? $1000 AliExpress ATC CNC Spindle Review

Jan 21, 2024
Makera Z1 Pro vs C45 Steel (and a Dead Probe)

Makera Z1 Pro vs C45 Steel (and a Dead Probe)

Oct 7, 2026
Affordable Chinese Granite Parallels — Are They Worth It? Mightymill

Affordable Chinese Granite Parallels — Are They Worth It?

May 9, 2023