Shipping crate DXF files - The Yield Point

These are the three laser jobs from my Gweike M3 Ultra CO2 tutorial:
  01_BASE_LID.dxf
  02_BACK_FRONT.dxf
  03_LEFT_RIGHT.dxf

Before you cut:
- Drawn for 9 mm plywood with finger joints. Plywood is never exactly 9 mm, so cut a test joint first.
- Sized for my chiller on a half Euro pallet (60 x 80 cm). Check the dimensions against your own load.
- The shipping markings are in the files. Put them on their own engraving layer in MLaser, as shown in the tutorial.
- After assembly I screwed in one extra wooden brace to stop the chiller moving. That brace is not in these files.
- Open the files in your CAD program first and check for double lines before they go to the laser.

Free to use for your own projects. No warranty, check everything before you cut.

Build story and video: https://theyieldpoint.com/chatgpt-shipping-crate/